New Respirator Classifications for 1998

Respirator Classifications Based on Filter Efficiency and Oil Resistance

Back to PPE index

Taken from Pesticide Registration Notice (PRN) 98-9 Notice to Manufacturers, Producers, Formulators and Registrants of Agricultural Pesticides. This information provides an explanation of the new labeling categories for nonpowered, air-purifying particulate filter respirators, which went into effect July of 1995.

       Three categories exist for filter efficiency and each category has three possible oil degradation resistances that may be selected and matched with filter efficiency. Each of the nine resulting respirator categories is designated by a code in which a letter -- N, R or P -- represents its oil resistance and a number -- 95, 99 or 100 -- represents filter efficiency.

• 95%
• 99%
• 99.97%

       The three categories of oil degradation resistance are based on the degree to which the filter performance is impaired by the deposition of oil. Examples of oils include: di-octyl phthalate oil, glycerine, and hydrocarbons used as lubricants. For Part 84 respirators, di-octyl phthalate (DOP) oil is utilized as a challenge material; this substance will act to neutralize the electrostatic charges present on the surface of filter fibers and reduce respirator efficiency. In this document the term "oil" will be used to represent any high-boiling point liquid hydrocarbon that will accumulate on the particulate filter of a respirator with minimal evaporation. Note that the accumulation of oil may lead to filter efficiency degradation. In assessing formulated products, registrants should work closely with respirator manufacturers to assure that the proper filter type is selected for the product.

• N-series (not resistant to oil) particulate filters may be used for solid particulate or liquid particulate hazards. During certification sodium chloride is used as a testing material and a very high particulate load (200 mg) is utilized for the test. Given the rigorousness of the testing regime, there is no recommended time limitation for an N-series filter.
  
• R-series (oil resistant) particulate filters may be used for solid and liquid particulate hazards. For those products containing oil, the R-series is to be used for only one work shift (an 8 hour work period) or per manufacturer's recommendations.
  
• P-series filters may be used for more than a single work period, but NIOSH has requested each respirator manufacturer to establish service time recommendations as part of their user instructions. It has been determined that long term oil exposure could reduce the efficiency of a P100 filter to levels below that of a P95 filter.

View the Federal Register Policy Statement on Labeling Requirements for Pesticides; Respirator Compliance:     Federal Register: May 7, 1998 (Volume 63, Number 88)

PR Notice 98-9 Notice to Manufacturers, Producers, Formulators and Registrants of Agricultural Pesticides--Subject: Modification of Respirator Statements for Pesticide Product Labels. View the entire PRN. (PDF format)

All PDF format files require Adobe Acrobat^® Reader to view. If you need to obtain a free copy of Acrobat^® Reader, please visit Adobe